AZ91D Easy To Use Customized Magnesium Alloy Plate With High Quality

Introduction of Magnesium Alloy Plate:

The AZ91D belongs to the cast magnesium alloy, mainly by the pressure mold casting into a manner, and can be changed by electrophoresis. It is characterized by a large strength, and corrosion resistance is greatly improved, which is mainly used for housing, small-size and shaped brackets of electrical products. A represents metal aluminum Al, Z represents metal zinc Zn, 9 represents aluminum content of 9%, 1 represents zinc content is 1%, and the last D is identifiable code. (National standard GB / T5153-2003)

Details of Magnesium Alloy Plate:

Type	Mg	Al	Zn	Mn	Si	Fe	Cu
AX31B	residual	2.5-3.5	0.60-1.4	0.20-1.0	≤0.08	≤0.003	≤0.001
AZ61A		5.8-7.2	0.40-1.5	0.15-0.50	≤0.10	≤0.005	≤0.005
AZ80A		7.8-9.2	0.20-0.80	0.12-0.50	≤0.10	≤0.005	≤0.005
AZ91D		8.5-9.5	0.45-0.90	0.17-0.40	≤0.08	≤0.004	≤0.001

Features of Magnesium Alloy Plate:

Magnesium alloy is the lightest metal, magnesium alloy strength, and stiffness of the magnesium alloy, and the impact resistance is better than aluminum alloy, which is widely used in automobiles, communication electronics, etc. The automotive industry is the most total amount of magnesium alloys, the best industries.

The magnesium alloy sheet is divided into sheets, medium plates, and thick plates. High thickboard strength, good rigidity, mostly used in aerospace military fields, while medium thin plates are used for civilian industries.

Due to the good thermal conductivity of magnesium, the cutting force is small, the heat dissipation speed during processing is very fast, and thus the tool life is long, the adhesive knife is small, so that the tool cost can be reduced, and the downtime required to replace the tool is shortened.

Because of magnesium is easy to cut, its chip performance is very good. Under normal circumstances, it can reach the desired final surface finish.

DOME METALS CO., LTD. is located in Zhengzhou, the capital city of Henan Province in central China, with convenient transportation and superior geographical location. It is a modern enterprise specializing in R&D, production and sales of magnesium alloy products. Production and operation of magnesium powder, rods, plates and other magnesium products for more than 10 years before 2015, and then industrial adjustment and asset reorganization according to market demand. In 2015, a production plant mainly composed of magnesium alloy deep-processed products and magnesium plates was completed. In 2017, a magnesium alloy welding wire production line was invested and a magnesium alloy welding wire-based production plant was established. After research and development, the factory has obtained a number of technical patents. Dome Metals was established in 2018 to specialize in expanding overseas markets. Become a qualified supplier of military industry in 2019, carry out research and development and production of military and electrical products.