Az31b Az31 Az61 Magnesium Alloy Rod 20mm Extruded Mg Alloy Bar
Introduction:
With the development of light, low energy, high -speed, and high
reliability directions such as cars and rail transit, high
-performance lightweight materials are urgently needed. As the
lightest metal structure material, magnesium alloy has the
advantages of high strength, excellent damping performance, and
recycling. It is considered to be an important supplement to
traditional metal materials such as steel, aluminum alloy, and
titanium alloy to improve energy in transportation.
Magnesium alloy is the lightest engineering metal material, which
has a series of advantages of low density and high strength. It is
an important lightweight material in the automotive, aerospace and
military industry. Metal magnesium and its alloy have a secret six
-way structure. The independent sliding system that can be started
at room temperature is less. Therefore, the deformation ability is
poor, and the widespread application of magnesium alloy is limited
to a certain extent.
Parameter:
| |
| 300mm or as customer's required |
| 900.0mm or as customer's required |
| 2000mm or as customer's required |
| 1000*2000mm,1219*2438mm,1219*3048mm,or as customer's required |
| Carving,aerospace,auto,concrete tools,3C(cell
phone/camera/compute),water heater,refrigerator,gas pipelines etc. |
| 1.Good resistance to deformation force |
|
3.Good absorption of vibration energy performance |
4.Good impact energy absorption characteristics |
5.Low melting, small specific heat |
| Ordinary industrial surface,or customized |
| |
| catalog | 1.Round bar |
| 1)Hot rolled black bar: (5-400)x6000mm or according to your
requirement. |
| 2)Acid round bar: (5-400)x6000mm or according to your requirement. |
| 3)Cold drawn bright bar: (1-20)x6000mm or according to your
requirement. |
| 4)Polishing round bar: (5-400)x6000mm or according to your
requests. |
| 2.Angle bar |
| 1)Hot rolled angle bar: (16-200)x(16-200)x(3-18)x(3000-9000)mm or
according to your requests |
| 2)Acid angle bar: (16-200)x(16-200)x(3-18)x(3000-9000)mm or
according to your requests. |
| 3)Cold drawn angle bar: (16-200)x(16-200)x(3-18)x(3000-9000)mm or
according to your requests. |
| 3. Flat bar |
| 1)Hot rolled flat bar: (3-30)*(10-200mm)*6000mm or according to
your requests. |
| 2)Cold drawn flat bar: (3-30)*(10-200mm)*6000mm or according to
your requests. |
| 4. Channel bar |
| 1)Hot rolled channel bar: (5-100)x6000mm or according to your
requests. |
| 2)Acid channel bar: (5-100)x6000mm or according to your requests. |
| 3)Cold drawn channel bar: (1-20)x6000mm or according to your
requests |
| 5.Hexagon bar |
| 1)Hot rolled hexagon bar: (5-100)x6000mm or according to your
requests. |
| 2) Acid hexagon bar: (5-100)x6000mm or according to your requests. |
| 3)Cold drawn hexagon bar: (1-20)x6000mm or according to your
requests t. |
| 4)Polishing hexagon bar: (5-100)x6000mm or according to your
requests. |
| 6. H Steel bar |
| 1)Hot rolled H bar: (5-100)x6000mm or according to your requests. |
| 2)Acid H bar: (5-100)x6000mm or according to your requests. |
| 3)Cold drawn H bar: (1-20)x6000mm or according to your requests. |
| 7. Square bar |
| 1)Hot rolled black bar: (5*5-400*400)x6000mm or according to your
requests. |
| 2)Acid square bar: (5*5-400*400)x6000mm or according to your
requests. |
| 3)Cold drawn square bar: (1*1-20*20)x6000mm or according to your
requests. |
| 4)Polishing square bar: (5*5-400*400)x6000mm or according to your
requests |
Feature of Magnesium Rods:
(1) Light weight. As a light metal structure material, magnesium
alloys are 1.74gcm-3, which is equivalent to 2/3 of aluminum, steel
L/4, and zinc about 1/4. This characteristic is of great
significance to reduce weight and reduce energy consumption in
modern handicap products.
(2) higher strength than strength. Under the same rigidity
conditions, the strong level of 1kg magnesium alloy is equal to
18kg of aluminum and 2.1kg steel.
(3) High shock absorption performance. Magnesium has excellent
stagnation shock absorption performance, which can absorb vibration
and noise. It is used as a device case to reduce noise
transmission, impact resistance, and reduce depression damage. Its
impact resistance is 20 times that of plastic.
(4) Good casting performance. Under the condition of maintaining a
good structure, the wall thickness of the magnesium products can be
less than 0.6mm, which cannot be achieved by plastic products under
the same intensity. Aluminum can only be compared with magnesium in
the range of 1.2 ~ 1.5mm.
(5) High -molding productivity. Compared with aluminum, the heat
capacity of magnesium alloys is lower, which means that it can
solidify faster in the mold. Generally speaking, its productivity
is 40%to 50%higher than aluminum die, and it can reach twice the
maximum of twice the die -cast aluminum.
Standard:ASTM B843-1995,GB/T21448-2008,GB/T17731-2009
Production-Quality Control
Quality Control in our foundry begins on the foundry floor, where
the first line of inspection is the casting and molding crew, our
lab technicians inspectors and managers completes the quality team.
Our quality control staff carefully monitors raw material, core
materials,packaging and all aspects of production.
