Hot Rolling Magnesium Alloys Rod AZ61 Magnesium Alloy Bar Price
Introduction:
In order to adapt to the development trend of highly integrated and
light and small, electronics and communication devices, magnesium
alloys are the ideal of transportation, electronic information,
communication, computer, sound -like equipment, laptop tools,
motors, forestry, textiles, nuclear power devices and other product
shells.
Magnesium alloys have the advantages of light weight, high
strength, good shock absorption, good thermal fatigue performance,
difficulty in aging, and good thermal conductivity, strong
electromagnetic shielding ability, very good die casting process,
especially easy to recycle, which is a replacement. Steel, aluminum
alloy and new generation of high -performance structural materials
for engineering plastics.
Parameter:
| |
| 300mm or as customer's required |
| 900.0mm or as customer's required |
| 2000mm or as customer's required |
| 1000*2000mm,1219*2438mm,1219*3048mm,or as customer's required |
| Carving,aerospace,auto,concrete tools,3C(cell
phone/camera/compute),water heater,refrigerator,gas pipelines etc. |
| 1.Good resistance to deformation force |
|
3.Good absorption of vibration energy performance |
4.Good impact energy absorption characteristics |
5.Low melting, small specific heat |
| Ordinary industrial surface,or customized |
| |
| catalog | 1.Round bar |
| 1)Hot rolled black bar: (5-400)x6000mm or according to your
requirement. |
| 2)Acid round bar: (5-400)x6000mm or according to your requirement. |
| 3)Cold drawn bright bar: (1-20)x6000mm or according to your
requirement. |
| 4)Polishing round bar: (5-400)x6000mm or according to your
requests. |
| 2.Angle bar |
| 1)Hot rolled angle bar: (16-200)x(16-200)x(3-18)x(3000-9000)mm or
according to your requests |
| 2)Acid angle bar: (16-200)x(16-200)x(3-18)x(3000-9000)mm or
according to your requests. |
| 3)Cold drawn angle bar: (16-200)x(16-200)x(3-18)x(3000-9000)mm or
according to your requests. |
| 3. Flat bar |
| 1)Hot rolled flat bar: (3-30)*(10-200mm)*6000mm or according to
your requests. |
| 2)Cold drawn flat bar: (3-30)*(10-200mm)*6000mm or according to
your requests. |
| 4. Channel bar |
| 1)Hot rolled channel bar: (5-100)x6000mm or according to your
requests. |
| 2)Acid channel bar: (5-100)x6000mm or according to your requests. |
| 3)Cold drawn channel bar: (1-20)x6000mm or according to your
requests |
| 5.Hexagon bar |
| 1)Hot rolled hexagon bar: (5-100)x6000mm or according to your
requests. |
| 2) Acid hexagon bar: (5-100)x6000mm or according to your requests. |
| 3)Cold drawn hexagon bar: (1-20)x6000mm or according to your
requests t. |
| 4)Polishing hexagon bar: (5-100)x6000mm or according to your
requests. |
| 6. H Steel bar |
| 1)Hot rolled H bar: (5-100)x6000mm or according to your requests. |
| 2)Acid H bar: (5-100)x6000mm or according to your requests. |
| 3)Cold drawn H bar: (1-20)x6000mm or according to your requests. |
| 7. Square bar |
| 1)Hot rolled black bar: (5*5-400*400)x6000mm or according to your
requests. |
| 2)Acid square bar: (5*5-400*400)x6000mm or according to your
requests. |
| 3)Cold drawn square bar: (1*1-20*20)x6000mm or according to your
requests. |
| 4)Polishing square bar: (5*5-400*400)x6000mm or according to your
requests |
Feature of Magnesium Rods:
1. Good cutting performance. The good cutting performance of the
magnesium is: allowing higher cutting speed to shorten the cutting
time; a few times higher than other metals (rarely stops and swords
to save operation time and knife cost); can cut at one time cutting
at one time Obtain excellent surface smoothness, and there are
rarely dandruff tumors; good dandruff characteristics and
temperature conduction can be exempted from the use of coolant or
lubrication.
2. Regeneration. Waste magnesium alloy castings can be melted and
cast as AZ9LD, AM50 or AM60 raw materials. Due to the growing
demand for die castings, the ability to recycle recycling is very
important. This characteristic of environmental protection
requirements make magnesium alloy more attractive than many plastic
materials.
3. High heat dissipation. Magnesium alloy has high heat dissipation
performance, which is suitable for electronic products with dense
design components today.
4. Anti -electromagnetic interference, good shielding. Magnesium
alloy has a good blocking electromagnetic wave function, which is
suitable for electronic products that need to prevent
electromagnetic interference. There is no pollution to the
environment. Magnesium and magnesium alloy are non -toxic metals,
and magnesium is oxidized and has no harm to the environment after
magnesium ions.
Standard:ASTM B843-1995,GB/T21448-2008,GB/T17731-2009
Production-Quality Control
Quality Control in our foundry begins on the foundry floor, where
the first line of inspection is the casting and molding crew, our
lab technicians inspectors and managers completes the quality team.
Our quality control staff carefully monitors raw material, core
materials,packaging and all aspects of production.
